Important Safety Instructions for Vehicle Lift

 

 

In order to properly maintain your product and ensure operator safety, it is the responsibility of the product owner to read and follow these instructions!

 

1.  Ensure the vehicle lift installation full complies with all applicable local and national rules, ordinances and regulations;

2.  Ensure that all operators are properly trained, know how to operate the vehicle lift safely, and are properly supervised;

3.  Do not operate the vehicle lift until you are sure all parts are in place and operating correctly;

4.  Keep your hands and feet away from the vehicle lift. Keep hands and feet away from any moving parts. Keep your feet away from the lift as it descends and avoid pressing on pointed objects;

5.  Keep the work area clean. A cluttered workspace can lead to injuries;

6.  The vehicle lift is only approved for indoor installation and use. Outdoor installation is prohibited;

7.  Only trained operators are allowed to handle the vehicle lift. All untrained persons must stay away from the workplace. Never allow untrained persons to handle or operate the vehicle lift;

8.  Use the vehicle lift properly and in the correct way;

9.  Warning! Keep persons and objects from the lift when lifting the a vehicle;

10. If the vehicle is at risk of falling, make sure no one is around the lift;

11. Before preparing to approach or service the vehicle, ensure that the safety device is in effect;

12. Dress appropriately when operating machines, and consider wearing non-slip steel-toe shoes for safety;

13. Beware of electric shock. In order to protect the operator from electric shock, the lift in use must be grounded. Do not connect the green wire to the terminal. This is the ground wire;

14. Danger! The power supply used in this type of lift has high voltage. Please disconnect the power supply before any circuit repair. Unplug in case the power supply is accidentally switched on during maintenance;

15. Warning! There is a risk of explosion. There are parts in the equipment that produce arc light and spark. Do not operate near flammable gas. This machine should not be placed in the lounge or basement;

16. Maintain with care. Keep the machine clean for better and safer operation. Perform proper lubrication and maintenance procedures according to the manual. Keep handles or buttons clean, dry, and free of oil;

17. Stay alert. Use common sense to observe what you are doing and stay alert;

18. Check for damaged parts. Check for adjustments to moving parts, damage to parts, or anything that may affect their operation. Do not use the machine if the parts are damaged;

19. Do not remove relevant safety parts from the machine. Do not use a lift if it is damaged or missing;

20. Operate the lift only at temperature between 5°C to 40°C  (41°F to 104°F).